de | en
DFG
FOR 1845
UP-HPC
DFG Research Unit
FOR 1845
Ultra-Precision High Performance Cutting (UP-HPC)

Publications

*Peer-reviewed articles

2020

Schönemann, L.; Riemer, O.; Karpuschewski, B. (2020):
Performance of ultraprecision milling with thermally adjustable cutting edges.
In: European Society for Precision Engineering and Nanotechnology (euspen): 20th International Conference & Exhibition. Virtual Conference, 2020-06-08/11, pp. 367–370.

Schönemann, L.; Berger, D.; Dörgeloh, T.; Riemer, O.; Brinksmeier, E.; Krüger, R.; Schreiber, P.; Denkena, D.; Hochbein, J.; Parsa, N.; Schenck, C.; Kuhfuss, B. (2020)*:
Synergistic approaches to ultra-precision high performance cutting
In: CIRP Journal of Manufacturing Science and Technology 28, pp. 38-51. doi: 10.1016/j.cirpj.2019.12.001.

2019

Schönemann, L. (2019):
Surface simulation for ultra-precision milling with multiple cutting edges.
69th CIRP General Assembly - Part 2. STC-S. Birmingham, 22.08.2019.

Schönemann, L.; Riemer, O. (2019)*:
Thermo-mechanical tool setting mechanism for ultra-precision milling with multiple cutting edges
In: Precision Engineering 55, pp. 171–178. doi: 10.1016/j.precisioneng.2018.09.003.

Preuß, W. (2019):
A guide to diamond machining
Aachen: Shaker Verlag, ISBN 978-3-8440-6540-4.

2018

Berger, D.; Schönemann, L.; Riemer, O.; Brinksmeier, E. (2018):
High speed cutting of monocrystalline silicon by off-axis diamond turning
In: 33rd ASPE Annual Meeting. Las Vegas, NV, USA, November 4 - November 9 2018, pp. 184-189.

Denkena, B.; Bergmann, B.; Krüger, R. (2018)*:
Elektromagnetische Linearführung für die hochpräzise Zerspanung
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 113 (7-8), pp. 443–447. doi: 10.3139/104.111938.

Schönemann, L. (2018):
Ultra-Precision High Performance Cutting
4th International Summer School "Trends in ultra-precision optical surface engineering". Leibniz Institute of Surface Engineering IOM. Leipzig: September 4 2018.

Dörgeloh, T.; Riemer, O.; Brinksmeier, E. (2018)*:
Automated microfluidic balancing system for high speed air-bearing spindles.
In: Procedia CIRP, Vol. 77. 8th CIRP Conference on High Performance Cutting. Budapest, HU, 2018-06-25/27, pp. 263–266. doi: 10.1016/j.procir.2018.09.011

Denkena, B.; Bergmann, B.; Krüger, R. (2018):
Levitation High-Performance Machining. Design & Realisation - Electromagnetic Ultra-Precision Linear Guide
In: Mikroniek, Issue 1 (2018), pp. 29-33.

Denkena, B.; Bergmann, B.: Krüger, R. (2018):
Enabling electromagnetic levitation technology for ultra-precision high performance machining
In: euspen's 18th International Conference & Exhibition. Venice, Italy, June 4-June 8, 2018, pp. 161-162.

2017

Schönemann, L.; Riemer, O.; Brinksmeier, E. (2017):
Recent advances in ultra-precision milling with multiple-cutting edges
In: 32nd ASPE Annual Meeting. Charlotte/NC, USA, October 29-November 03, 2017, pp. 175-179.

Schönemann, L. (2017):
High speed ultra-precision manufacturing.
WGP-Symposium Production of Tomorrow. Hannover, September 21 2017.

Schönemann, L. (2017):
Challenges of nanometer-precise tool setting by using a thermal actuator in diamond milling.
STC-P Technical Presentation. 67th CIRP General Assembly, Part II. Lugano, CH, August 25 2017.

Brinksmeier, E.; Schönemann, L. (2017):
Speeding up ultra-precision manufacturing
In: 17th euspen International Conference & Exhibition. Hannover, Germany, May 30-June 2, 2017, pp. 99-100.

Denkena, B.; Dahlmann, D.; Krüger, R. (2017):
Experimental investigation of an electromagnetic linear guide for ultra-precision high performance machining
In: 17th euspen International Conference & Exhibition. Hannover, Germany, May 30-June 2, 2017, pp. 447-448.

Cao, H.; Dörgeloh, T.; Riemer, O.; Brinksmeier, E. (2017)*:
Adaptive separation of unbalance vibration in air bearing spindles
10th CIRP Conference on Intelligent Computation in Manufacturing Engineering. Gulf of Naples, Italy, July 20-22, 2016.
In: Procedia CIRP, Vol. 62, pp. 357-362.
doi:10.1016/j.procir.2016.06.069

Denkena, B.; Dahlmann, D.; Sassi, N. (2017)*:
Analysis of an ultra-precision positioning system and parametrization of ist structural model for error compensation
10th CIRP Conference on Intelligent Computation in Manufacturing Engineering. Gulf of Naples, Italy, July 20-22, 2016.
In: Procedia CIRP, Vol. 62, pp. 335-339.
doi:10.1016/j.procir.2016.06.054

Brinksmeier, E.; Preuss, W.; Riemer, O.; Rentsch, R. (2017)*:
Cutting forces, tool wear and surface finish in high speed diamond machining
In: Precision Engineering, Vol. 49, pp. 293-304.
doi:10.1016/j.precisioneng.2017.02.018


2016

Foremny, E.; Schenck, C.; Kuhfuss, B. (2016):
Coupling system for ultra precision machining*
In: Journal of Mechanics Engineering and Automation, Vol. 6, No. 6, 2016, pp. 301-306.
doi:10.17265/2159-5275/2016.06.006

Bloem, A.; Schenck, C.; Kuhfuss, B. (2016)*:
Adaptive state-space model for ultra-precision feed axis
In: Procedia Technology, Vol. 26; 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, SysInt 2016. Paderborn, June 13-June 15, 2016, pp. 20–26.
doi:10.1016/j.protcy.2016.08.004

Foremny, E.; Schenck, C.; Kuhfuss, B. (2016)*:
Integrated ultrasonic driven balancer for ultra precision high speed machine tools
In: Procedia Technology, Vol. 26; 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, SysInt 2016. Paderborn, June 13-June 15, 2016, pp. 316–323.
doi:10.1016/j.protcy.2016.08.041

Denkena, B.; Dahlmann, D.; Krueger, R. (2016)*:
Design and Optimisation of an Electromagnetic Guide for Ultra-Precision High Performance Cutting
In: Procedia CIRP, Vol. 46; 7th HPC 2016 – CIRP Conference on High Performance Cutting, Chemnitz, Germany, May 31-June 2, 2016. pp. 147-150.
doi:10.1016/j.procir.2016.02.056

Dörgeloh, T.; Beinhauer, A.; Riemer, O.; Brinksmeier, E. (2016)*:
Microfluidic Balancing Concepts for Ultraprecision High Speed Applications.
In: Procedia CIRP, Vol. 46; 7th HPC 2016 – CIRP Conference on High Performance Cutting, Chemnitz, Germany, May 31-June 2, 2016. pp. 185–188.
doi:10.1016/j.procir.2016.03.174

Schönemann, L.; Riemer, O.; Brinksmeier, E. (2016)*:
Control of a Thermal Actuator for UP-milling with Multiple Cutting Edges.
In: Procedia CIRP, Vol. 46; 7th HPC 2016 – CIRP Conference on High Performance Cutting, Chemnitz, Germany, May 31-June 2, 2016. pp. 424–427.
doi:10.1016/j.procir.2016.03.194

Foremny, E.; Schenck, C.; Kuhfuss, B. (2016)*:
Dynamic Behavior of an Ultra Precision Spindle used in Machining of Optical Components.
In: Procedia CIRP, Vol. 46; 7th HPC 2016 – CIRP Conference on High Performance Cutting, Chemnitz, Germany, May 31-June 2, 2016. pp. 452–455.
doi:10.1016/j.procir.2016.04.039

Bloem, A.; Schenck, C.; Kuhfuss, B.(2016)*:
Dynamic Behavior of Ultra Precision Feed Axis at Increased Velocities.
In: Procedia CIRP, Vol. 46; 7th HPC 2016 – CIRP Conference on High Performance Cutting, Chemnitz, Germany, May 31-June 2, 2016. pp. 456–459.
doi:10.1016/j.procir.2016.04.040

Denkena, B.; Dahlmann, D.; Krueger, R. (2016):
Control system for an ultra-precision electromagnetic linear guide.
In: 16th euspen International Conference & Exhibition, Nottingham, UK, May 30-June 3, 2016.

Bloem, A.; Wilhelmi, P.; Schenck, C.; Kuhfuss, B. (2016):
2D position sensor based on speckle correlation - experimental setup for high-speed measurements and in field tests.
In: 11th International Conference on Micro Manufacturing (ICOMM 2016). Irvine/CA, USA, May 28-May 31, 2016. Paper No. 17.

Dahlmann, D.; Sassi, N.; Denkena, B. (2016):
Approaches for Detailed Modelling of Ultra-Precision Positioning Systems
In: Modern Mechanical Engineering, Vol. 06, No. 01, 2016, pp. 44–50.
doi:10.4236/mme.2016.61005


2015

Brinksmeier, E.; Riemer, O.; Schönemann, L.*:
High Performance Cutting for Ultra-Precision Machining
In: International Journal of Nanomanufacturing, Vol. 11, No. 5/6, 2015, pp. 245–260.

Schönemann, L.:
Herausforderungen der ultrapräzisen Hochgeschwindigkeitsbearbeitung
In: Fertigungstechnisches Kolloquium "Ultra-Präzisionsbearbeitung auf dem Weg zur industriellen Fertigung". IWF - Institut für Werkzeugmaschinen und Fertigungstechnik, ETH Zürich, November 12, 2015.

Brinksmeier, E.; Preuß, W.; Riemer, O.; Rentsch, R.:
Ultraprecision High Speed Cutting
In: 30th ASPE Annual Meeting. Austin/TX, USA, November 1-6, 2015. pp. 58-63.

Schönemann, L.; Riemer, O.; Brinksmeier, E.:
Using controlled thermal expansion for tool alignment in ultra-precision milling
In: 30th ASPE Annual Meeting. Austin/TX, USA, November 1-6, 2015. pp. 91–94.

Riemer, O.; Schönemann, L.; Dörgeloh, T.; Beinhauer, A.; Foremny, E.; Brinksmeier, E.; Kuhfuß, B.:
Balancing concepts for high speed aerostatic spindles.
In: 30th ASPE Annual Meeting. Austin/TX, USA, November 1-6, 2015. pp. 273–274.

Denkena, B.; Dahlmann, D.; Krueger, R.*:
Electromagnetic Levitation Guide for Use in Ultra-Precision Milling Centres
In: Procedia CIRP, Volume 37, 2015, S. 199-204.
doi:10.1016/j.procir.2015.08.008

L. Schönemann, N. Sassi, R. Krüger, A. Bloem, B. Denkena, B. Kuhfuß*:
Ultrapräzise Hochgeschwindigkeitsbearbeitung, Teil 2: Potentiale elektromagnetischer Linearführungen kombiniert mit modellbasierten Steuerungskonzepten
In: wt Werkstattstechnik online, Jahrgang 105, Heft 7/8, 2015, pp. 469–474

Schönemann, L.; Preuß, W.; Riemer, O.; Foremny, E.; Brinksmeier, E.; Kuhfuß, B.*:
Ultrapräzise Hochgeschwindigkeitsbearbeitung, Teil 1: Steigerung der Flächenleistung durch den Einsatz von Mehrfach-Werkzeugen und HSC-Spindeln
In: wt Werkstattstechnik online, Jahrgang 105, Heft 6, 2015, pp. 366–370

Bloem, A.; Schenck, C.; Kuhfuss, B.:
2D position sensor based on speckle correlation
In: 4M/ICOMM2015 International Conference on Micromanufacturing. Milano, Italy, March 3-April 1, 2015.

Foremny, E.; Schenck, C.; Kuhfuss, B.:
High Precision Coupling System
In: 4M/ICOMM2015 International Conference on Micromanufacturing. Milano, Italy, March 3-April 1, 2015, pp. 205-208.

Riemer, O.; Schönemann, L.:
High Performance Ultra Precision Machining
In: Proceedings of the International Symposium on Ultraprecision Engineering and Nanotechnology (ISUPEN2015). Tokyo, Japan, 16.03.2015

Schönemann, L.; Mejia, P.; Riemer, O.; Brinksmeier, E.:
Design and evaluation of a thermal actuator for ultra-precision machining
In: Blunt, L.; Hansen, H. N. (Eds.), Proceedings of the LAMDAMAP 11th International Conference. Huddersfield, UK, March 17-18, 2015, ISBN: 978-0-9566790-5-5, pp. 320–330.


2014

Brinksmeier, E.; Menten, A.; Preuß, W.:
Tool wear in high speed diamond milling
In: Proceedings of the ASPE 29th Annual Meeting. Boston, USA, November 9-14, 2014 ISBN: 978-1-887706-66-7, pp. 494-495.

Brinksmeier, E.; Ohlsen, I.; Preuß, W.:
Dependence of the cutting forces on cutting speed in high speed diamond turning
In: Proceedings of the ASPE 29th Annual Meeting. Boston, USA, November 9-14, 2014 ISBN: 978-1-887706-66-7, pp. 492-493.


2013

Brinksmeier, E.; Denkena, B.; Kuhfuss, B.; Riemer, O.:
Muss Ultrapräzision zeit- und kostenintensiv sein?
In: Mikroproduktion 3 (2013), pp. 44-52.